Accessories - Microphone Grids

The modular nature of the 4018 Vocal Microphone allows you to switch both the capsule as well as the adapter.

The modular nature of the 4018 Vocal Microphone allows you to switch both the capsule as well as the adapter.

The modular nature of the 4018 Vocal Microphone allows you to switch both the capsule as well as the adapter.

The Nose Cone gives your microphone a perfect omnidirectional response across the whole audio frequency range. It counteracts the directional characteristics that omnidirectional microphones exhibit at higher frequencies. It also guarantees an even tonal balance of sound arriving at all angles of incidence but with a high-frequency boost on-axis.

The Nose Cone is specially designed for use with 4006 Omnidirectional Microphone variants.

This nose cone is especially suitable for increasing the ambiance to your recordings, or for miking a variety of sound sources that are positioned around the microphone.

The APE30RS, a Ø30 mm sphere, gives a mild modification of your microphone's on-axis and off-axis frequency responses and a slight change in the direction-to-reverberation ratio. This will give your recordings greater presence, nearness and clarity on-axis (especially around 4 kHz).

An on-axis boost, between 2 kHz and 8 kHz, and high-frequency roll-off off-axis, will sometimes help you capture the subtle audible details of both musical instruments and voices.

A white-painted, sturdy, stainless steel cap for subminiature microphones that can be painted and/or covered in makeup. Allows unlimited visual creativity when miking up talent for theatre productions.

To use, remove the original 6060 Series grid and replace it with the Paintable Subminiature Cap. All types of paint and makeup normally used in a theatre environment can be used. Please note that even with the Subminiature Paintable Cap attached, the 6060 Subminiature is IP58-certified.

This cap can be used by the film industry to hide a white mic in the button-hole of a white shirt or the like.

A durable protective  cap for the subminiature lavalier and headset microphones. It can easily be removed for cleaning. A tactile and audible "click" ensures that the cap has been secured properly to the microphone housing. The grid resembles the well-known DPA logo and the tiny grid holes help protect the microphone capsule from water and sweat.

Miniature Grid, High Boost for Lavalier Miniature and Headset Microphones. Available in beige, brown, white and black.

A kit of five protection grids for the Lavalier Miniature and Headset Microphones. When fitted the grids introduces a 10 dB soft boost around 12 kHz for applications where the Miniature Microphones need to be placed on the chest of the performer. The metal grid is anodized stainless steel.

Sold as a set of five pcs.

Miniature Grid, Soft Boost for Lavalier Miniature and Headset Microphones. Available in beige, brown, white and black.

A kit of five protection grids for the Lavalier Miniature and Headset Microphones. When fitted, the grids introduce a 3 dB soft boost around 8 - 20 kHz for applications where the Miniature Microphones need to be placed on the head of the performer. The metal grid is anodized stainless steel.

Sold as a set of five pcs.

Miniature Mesh for use with 4071 Omnidirectional Microphone. Reduces slight wind noise or pop noise from a speaker's voice or any other turbulence that can cause the diaphragm to disperse.

The Miniature Mesh will give a high frequency boost that is strongest on axis. For use on a speaker’s chest, it is recommended to mount the microphone pointing upwards in order to avoid boosting the reflections.