Accessories - Microphone Table & Floorstand

The Microphone Base brings sleek Scandinavian design to the meeting rooms where it is intended to be used. There are two main mounting possibilities: the ceiling or the table and the Microphone Base is perfect for either. It can be ceiling-mounted upside down or positioned on top of a table. It can also be purchased as an individual; in the two colors and three different connector solutions.

The Microphone Base comes with a built-in shock mount system that gives very good suppression of unwanted handling noise from a table or the like. Hidden mounting holes below the top cover make it possible to permanently affix the unit to a flat surface for an exclusive appearance. The audio cables are an integral part of the Microphone Base unit.

The Microphone Base brings sleek Scandinavian design to the meeting rooms where it is intended to be used. There are two main mounting possibilities: the ceiling or the table and the Microphone Base is perfect for either. It can be ceiling-mounted upside down or positioned on top of a table. It can also be purchased as an individual; in the two colors and three different connector solutions.

The Microphone Base comes with a built-in shock mount system that gives very good suppression of unwanted handling noise from a table or the like. Hidden mounting holes below the top cover make it possible to permanently affix the unit to a flat surface for an exclusive appearance. The audio cables are an integral part of the Microphone Base unit.

The Microphone Base brings sleek Scandinavian design to the meeting rooms where it is intended to be used. There are two main mounting possibilities: the ceiling or the table and the Microphone Base is perfect for either. It can be ceiling-mounted upside down or positioned on top of a table. It can also be purchased as an individual; in the two colors and three different connector solutions.

The Microphone Base comes with a built-in shock mount system that gives very good suppression of unwanted handling noise from a table or the like. Hidden mounting holes below the top cover make it possible to permanently affix the unit to a flat surface for an exclusive appearance. The audio cables are an integral part of the Microphone Base unit.

The Microphone Base brings sleek Scandinavian design to the meeting rooms where it is intended to be used. There are two main mounting possibilities: the ceiling or the table and the Microphone Base is perfect for either. It can be ceiling-mounted upside down or positioned on top of a table. It can also be purchased as an individual; in the two colors and three different connector solutions.

The Microphone Base comes with a built-in shock mount system that gives very good suppression of unwanted handling noise from a table or the like. Hidden mounting holes below the top cover make it possible to permanently affix the unit to a flat surface for an exclusive appearance. The audio cables are an integral part of the Microphone Base unit.

The Microphone Base brings sleek Scandinavian design to the meeting rooms where it is intended to be used. There are two main mounting possibilities: the ceiling or the table and the Microphone Base is perfect for either. It can be ceiling-mounted upside down or positioned on top of a table. It can also be purchased as an individual; in the two colors and three different connector solutions.

The Microphone Base comes with a built-in shock mount system that gives very good suppression of unwanted handling noise from a table or the like. Hidden mounting holes below the top cover make it possible to permanently affix the unit to a flat surface for an exclusive appearance. The audio cables are an integral part of the Microphone Base unit.

The Microphone Base brings sleek Scandinavian design to the meeting rooms where it is intended to be used. There are two main mounting possibilities: the ceiling or the table and the Microphone Base is perfect for either. It can be ceiling-mounted upside down or positioned on top of a table. It can also be purchased as an individual; in the two colors and three different connector solutions.

The Microphone Base comes with a built-in shock mount system that gives very good suppression of unwanted handling noise from a table or the like. Hidden mounting holes below the top cover make it possible to permanently affix the unit to a flat surface for an exclusive appearance. The audio cables are an integral part of the Microphone Base unit.

The Table Shock Mount is a highly stylish fixed microphone mount. It is optimized for the weight and dimensions of our Gooseneck and Floor Stand Microphones.

The Table Shock Mount offers the best shock rejection available of any integrated podium mount. Vertical softness absorbs handling vibration. Horizontal movements are controlled to prevent the podium boom from touching the mount. Best performance is obtained with mics weighing between 140 g (5 oz) and 240 g (8.5 oz).

The Table Shock Mount is designed to match the sleek Scandinavian look of our Gooseneck Installation Solutions. The top part of the mount can be custom ordered with different finishes to match surrounding architectural appearance.

The Table Shock Mount is easy to mount. It only requires a hole in the table plate with a diameter between 55-59 mm (2.16-2.32 in). The mount fits plate thicknesses from 8-38 mm (0.31-1.49 in).

Ø250 mm (9.8 in) floor base with a strong powder-painted matte black surface. It has three rubber feet, which ensures stable placement of the microphone stand on any surface.

The DUA0250 Floor Base has an integrated shock-mount solution: the thread screw holding the Stand Extension and Active Boom Pole. This unique design allows for a long-stage microphone boom pole that does not swing, but rapidly stabilizes itself after being positioned.

The DUA0250 Floor Base is part of the elegant and flexible DPA Pencil Series of floor stands. It is supplied as standard with DPA Gooseneck Microphone.

The BLM6000 Boundary Layer Mount is a unique accessory that enhances the versatility of your DPA Lavalier Microphone. It is a soft piece of durable rubber with a diameter of 75 mm (2.95 in). It has an underside cavity for mounting a DPA 4060, 4061, 4062 or 4063 microphone.

Users will benefit from the special characteristics of the surrounding sound field on which the mic is mounted: a 6 dB gain of direct sound and only a 3 dB gain of the diffuse sound. The sound captured has both greater clarity, especially at high frequencies, and speech intelligibility compared to sound captured above the surface.

The BLM6000 Boundary Layer Mount can be mounted on all surfaces that reflect sound such as floors, walls or ceilings.

Placing a DPA Lavalier Microphone in this little device on the inside lid of an open grand piano also provides a very distinct and crispy sound.

A beautifully-designed table base for use with most microphone holders with a 3/8-inch thread. It has a black non-reflective surface and is optimized for use with CSM4000 Compact Shock Mount.

Together they create a tabletop microphone solution that is not affected by low-frequency transmission through the table.

For podium or stylish floor stand applications, the Gooseneck MMP-F preamplifier series is available in different lengths and gooseneck choices.

Equipped with state-of-the-art preamplifier design and sleek appearance, you can combine this preamplifier with any modular capsule in the Pencil Microphones Series. Excellent radio frequency rejection is obtained through the DPA-designed impedance balancing with active drive.

Custom lengths (up to 120 cm) and gooseneck choices (top/bottom/both) can be ordered at a custom fee charge.

For podium or stylish floor stand applications, the Gooseneck MMP-F preamplifier series is available in different lengths and gooseneck choices.

Equipped with state-of-the-art preamplifier design and sleek appearance, you can combine this preamplifier with any modular capsule in the Pencil Microphones Series. Excellent radio frequency rejection is obtained through the DPA-designed impedance balancing with active drive.

Custom lengths (up to 120 cm) and gooseneck choices (top/bottom/both) can be ordered at a custom fee charge.

For podium or stylish floor stand applications, the Gooseneck MMP-F preamplifier series is available in different lengths and gooseneck choices.

Equipped with state-of-the-art preamplifier design and sleek appearance, you can combine this preamplifier with any modular capsule in the Pencil Microphones Series. Excellent radio frequency rejection is obtained through the DPA-designed impedance balancing with active drive.

Custom lengths (up to 120 cm) and gooseneck choices (top/bottom/both) can be ordered at a custom fee charge.

For podium or stylish floor stand applications, the Gooseneck MMP-F preamplifier series is available in different lengths and gooseneck choices.

Equipped with state-of-the-art preamplifier design and sleek appearance, you can combine this preamplifier with any modular capsule in the Pencil Microphones Series. Excellent radio frequency rejection is obtained through the DPA-designed impedance balancing with active drive.

Custom lengths (up to 120 cm) and gooseneck choices (top/bottom/both) can be ordered at a custom fee charge.

For podium or stylish floor stand applications, the Gooseneck MMP-F preamplifier series is available in different lengths and gooseneck choices.

Equipped with state-of-the-art preamplifier design and sleek appearance, you can combine this preamplifier with any modular capsule in the Pencil Microphones Series. Excellent radio frequency rejection is obtained through the DPA-designed impedance balancing with active drive.

Custom lengths (up to 120 cm) and gooseneck choices (top/bottom/both) can be ordered at a custom fee charge.

This is a complete, active microphone floor stand solution in the modular Gooseneck Microphone Series. The floor stand has an exclusive, elegant design with a black non-reflective surface.

The surface is specially made to handle the, from time to time, rough life in TV-studios, OB-vans and on stage in theaters and concert halls.

The DUA0250 Floor Base has an integrated shock-mounting solution; the thread screw holds the Stand Extension and Active Boom Pole. This unique design allows for a long stage microphone boom pole that does not swing and rapidly stabilizes itself after being positioned.

You can combine the MMP-FGT Floor Stand with any of the modular capsules from the Pencil series. The complete stand is also available with as the Gooseneck Floor Stand Microphone.

This is a complete, active microphone floor stand solution in the modular Gooseneck Microphone Series. The floor stand has an exclusive, elegant design with a black non-reflective surface.

The surface is specially made to handle the, from time to time, rough life in TV-studios, OB-vans and on stage in theaters and concert halls.

The DUA0250 Floor Base has an integrated shock-mounting solution; the thread screw holds the Stand Extension and Active Boom Pole. This unique design allows for a long stage microphone boom pole that does not swing and rapidly stabilizes itself after being positioned.

You can combine the MMP-FGT Floor Stand with any of the modular capsules from the Pencil series. The complete stand is also available with as the Gooseneck Floor Stand Microphone.