Two-way passive, coaxial reflex loaded fullrange loudspeaker
The compact and sleek enclosure contains a 3” (75mm) diaphragm, 1.3” exit HF compression drive unit coaxially loaded by a 15” (381mm) LF drive unit, linked via a signature EM Acoustics internal passive crossover network. Both the LF and HF drive units share the same magnet assembly, reducing overall weight and enclosure profile. The coaxial drive unit arrangement provides a smooth conical 80° dispersion pattern for maximum coverage, allowing the speaker to be deployed in either a vertical or horizontal orientation while still retaining the same dispersion pattern. Optimal reflex tuning extends low frequency response to allow the i-C15 to be used stand-alone for speech or moderate duty music reinforcement applications, or with subwoofers from the EM Acoustics range to further extend LF response.
The robust enclosure is constructed from premium multi-laminate Birch plywood and is finished in impact resistant textured paint. The enclosure contains four M10 exposed-thread rigging points specifically for use with optional horizontal or vertical accessory cradles.
Additionally, four M8 threaded points are provided on one of the angled back faces for installation using OmniMount™ Series 60 or PowerDrive Series 100 bracket products. The asymmetrical cabinet shape permits installation closer to walls or ceilings than a traditional trapezoidal enclosure, and also allows the i-C15 to be conveniently used as a stage monitor with a choice of two wedge angles.
The i-C15 is supplied in black or white as standard, however RAL colour matching is available if required. The front of the loudspeaker is protected by a rigid steel grille backed with acoustically transparent fabric for a stylish and discreet appearance. A recessed panel on the rear of the enclosure provides two Neutrik® SpeakON™ NL4 connectors for input and enclosure link.
The i-C15 requires a single amplifier channel, and should be used with professional power amplifiers capable of delivering 750-1000W RMS into an 8-ohm load. For best results, the EM Acoustics DQ10 or DQ20 advanced system amplifiers should be used, or the AQ-10 power amplifier.
||Two-way coaxial passive, reflex loaded
||1 x 15" LF
||1 x 1.3" exit HF
||690 x 440 x 418 mm
||80° conical (-6dB points)
||55Hz - 20kHz (±3dB)
||128dB continuous, 134dB peak
||450W RMS, 900W program
||2 x NL4
(For full specifications see manufacturers product site under "links" tab)