Your browser is not supported. For the best experience, a newer version or another browser is recommended.
In order to give you better service we use cookies. By continuing to browse the site you are agreeing to our use of cookies.

Audio Over CAT

Audio Over Cat5

Cat 5/6 eliminates the need for bulky and expensive multi-pair audio cable runs, and allows you to take advantage of pre-wired networks to connect from one room to another.

Number of articles 12
Sort
Radial DiNET DAN-RX
R800 1062 00

Compact Dante network interface

The DAN-RX provides a simple way to take a stereo feed from a Dante network and convert it to analog audio for monitoring in any location. Balanced XLR outputs allow you to connect to professional audio equipment such as a mixing console, amplifier, or a pair of powered speakers. In addition, a local 3.5mm headphone output is equipped with its own level control to test audio before connection to the PA system or to monitor locally with headphones, making it useful in events that use personal monitor systems. The DAN-RX can be powered from an included external supply or any Power over Ethernet (PoE) network switch, and both of these options can be used simultaneously to provide redundancy for critical applications.

Specifications

Audio circuit type High current balanced active output device
Number of channels Two channels
Frequency response 20Hz - 20kHz
Dynamic range >100dB
Gain 8dBu max @ -6dBfs
Total harmonic dirstortion 0.007% @ -6dBfs
Output impedance 150 Ohms
Power 15VDC 400mA (included) or PoE

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Radial DiNET DAN-TX
R800 1063 00

Compact Dante Network Interface

Need to connect a smartphone, tablet, or any playback device to a Dante network? How about an electric guitar, while still feeding an amp on stage? The DAN-TX can do it all. In fact, with signal handling of up to +24dB, you can connect the line level outputs of a mixing console to the DAN-TX without breaking a sweat. A local level control allows you to adjust as needed, and a number of input connector types ensures you won’t be digging around for an adaptor cable at a critical moment. No matter what source you’re using, the DAN-TX is the easiest way to get your analog audio onto a Dante network.

Specifications

Audio circuit type High current balanced active input device
Number of channels Two channels
Frequency response 20Hz - 20kHz
Dynamic range >103dB
Total harmonic dirstortion 0.008% @ -6dBfs
Intermodulation distortion 0.0017% -10dBfs
Input impedance Unbalanced: 240kΩ (20kΩ Line Mode), Balanced: 40kΩ,
Noise -98dB (EIN)
Power 15VDC 400mA (included) or PoE

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Radial DiNET DAN TX-2
R800 1064 00

Two Channels of Analog Audio over Dante

The DiNET DAN-TX2 makes it easy to transmit two channels of high quality analog audio over a Dante or AES67-compliant network. Multiple input options are provided, with Balanced XLR/TRS connectors for professional audio sources, RCA jacks for line level consumer devices, and a 3.5mm aux input for connection to laptops, smartphones, and tablets. Trim controls and pad switches are included for each channel, with a link switch to simplify control for stereo sources. The RJ45 network connection is compatible with Neutrik etherCON connector carriers to prevent accidental disconnection and protect cable terminations, and redundant powering is available for critical applications by using the included external power supply and Power over Ethernet (PoE) simultaneously. The DAN-TX2 can be mounted in 19" equipment racks with the optional SA series rackmount adaptor kit.

Specifications

Audio circuit type High current balanced active input device
Number of channels Two channels
Frequency response 20Hz - 20kHz
Dynamic range >103dB
Total harmonic dirstortion 0.008% @ -6dBfs
Intermodulation distortion 0.0017% -10dBfs
Input impedance Unbalanced: 20k Ohms, Balanced: 40k Ohms
Output impedance 330 Ohms
Equivalent input noise -98dB
Maximum input +28dBu
Power 15VDC 400mA (included) or PoE

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Radial DiNET DAN  RX-2
R800 1065 00

Dual Output Dante Endpoint

The DAN-RX2 is a road-worthy digital receiver capable of delivering two channels of analog audio to any location from a Dante or AES-67 compliant network. Balanced XLR outputs include a ground lift and a separate headphone amp with its own level control is included for local testing or personal monitoring. The RJ45 network connection is compatible with Neutrik etherCON connector carriers to prevent accidental disconnection and protect cable terminations. Redundant powering is available for critical applications by using the included external power supply and Power over Ethernet (PoE) simultaneously, and the DAN-RX2 can be mounted in 19" equipment racks with the optional SA series rackmount adaptor kit.

Specifications

Audio circuit type High current balanced active output device
Number of channels Two channels
Frequency response 20Hz - 20kHz
Dynamic range >100dB
Gain +18dBu max @ 0dBfs
Total harmonic dirstortion 0.007% @ -6dBfs
Output impedance 150 Ohms
Power 15VDC 400mA (included) or PoE

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Catapult Mini RX
CATAPULT MINI RX

4-Channel Cat 5 Audio Snake

The Catapult Mini System works like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.

Specifications

Audio circuit type Passive splitter
Frequency response 7Hz - 20kHz
Dynamic range 140dB
Total harmonic dirstortion 0.0005% @ 1kHz
Common mode rejection ratio >103dB
Maximum input +35dBu
Power Passive - no power required

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Catapult Mini TX
CATAPULT MINI TX

4-Channel Cat 5 Audio Snake

The Catapult Mini System works like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.

Specifications

Audio circuit type Passive splitter
Frequency response 7Hz - 20kHz
Dynamic range 140dB
Total harmonic dirstortion 0.0005% @ 1kHz
Common mode rejection ratio >103dB
Maximum input +35dBu
Power Passive - no power required

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Catapult Mini TRS
R800 8032 00

4-Channel Cat 5 Audio Snake

The Catapult Mini System works like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.

Specifications

Audio circuit type Passive splitter
Frequency response 7Hz - 20kHz
Dynamic range 140dB
Total harmonic dirstortion 0.0005% @ 1kHz
Common mode rejection ratio >103dB
Maximum input +35dBu
Power Passive - no power required

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Radial Catapult RX4
R800 8025 00

4-Channel Cat 5 Audio Snake

The Catapult TX4 and RX4 act like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.

Mix & Match

All of the Radial Catapult modules are compatible with each other, and each is sold individually, so you can select whichever combination best suits your needs. The Catapult RX4 and TX4 can be used together as a pair, creating a 4-channel audio snake. However, if you need transformer isolation to prevent hum and buzz when splitting audio signals, two additional models of Catapults are available. The TX4L and RX4L have line level isolation transformers for splitting playback tracks or outputs to amp racks, while the TX4M and RX4M can be employed when splitting mic signals on stage. Use any combination of these six models, along with the compact Catapult Mini RX and TX to create a custom snake designed for your unique application.

Specifications

Audio circuit type Passive splitter
Frequency response 7Hz - 20kHz
Dynamic range 140dB
Total harmonic dirstortion 0.0005% @ 1kHz
Common mode rejection ratio <103dB
Maximum input +35dBu
Power Passive - no power required

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Radial Catapult TX4L
R800 8024 00

4-Channel Cat 5 Audio Snake

The Catapult TX4 and RX4 act like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.

Mix & Match

All of the Radial Catapult modules are compatible with each other, and each is sold individually, so you can select whichever combination best suits your needs. The Catapult RX4 and TX4 can be used together as a pair, creating a 4-channel audio snake. However, if you need transformer isolation to prevent hum and buzz when splitting audio signals, two additional models of Catapults are available. The TX4L and RX4L have line level isolation transformers for splitting playback tracks or outputs to amp racks, while the TX4M and RX4M can be employed when splitting mic signals on stage. Use any combination of these six models, along with the compact Catapult Mini RX and TX to create a custom snake designed for your unique application.

Specifications

Audio circuit type Passive line splitter, transformer based
Frequency response 7Hz - 20kHz
Dynamic range 140dB
Total harmonic dirstortion 0.0007% @ 1kHz
Common mode rejection ratio >113dB
Maximum input +35dBu
Power Passive - no power required

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Radial Catapult RX4L
R800 8027 00

4-Channel Cat 5 Audio Snake

The Catapult TX4 and RX4 act like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.

Mix & Match

All of the Radial Catapult modules are compatible with each other, and each is sold individually, so you can select whichever combination best suits your needs. The Catapult RX4 and TX4 can be used together as a pair, creating a 4-channel audio snake. However, if you need transformer isolation to prevent hum and buzz when splitting audio signals, two additional models of Catapults are available. The TX4L and RX4L have line level isolation transformers for splitting playback tracks or outputs to amp racks, while the TX4M and RX4M can be employed when splitting mic signals on stage. Use any combination of these six models, along with the compact Catapult Mini RX and TX to create a custom snake designed for your unique application.

Specifications

Audio circuit type Passive line splitter, transformer based
Frequency response 7Hz - 20kHz
Dynamic range 140dB
Total harmonic dirstortion 0.0007% @ 1kHz
Common mode rejection ratio >113dB
Maximum input +35dBu
Power Passive - no power required

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Radial Catapult TX4M
R800 8023 00

4-Channel Cat 5 Audio Snake

The Catapult TX4 and RX4 act like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.

Mix & Match

All of the Radial Catapult modules are compatible with each other, and each is sold individually, so you can select whichever combination best suits your needs. The Catapult RX4 and TX4 can be used together as a pair, creating a 4-channel audio snake. However, if you need transformer isolation to prevent hum and buzz when splitting audio signals, two additional models of Catapults are available. The TX4L and RX4L have line level isolation transformers for splitting playback tracks or outputs to amp racks, while the TX4M and RX4M can be employed when splitting mic signals on stage. Use any combination of these six models, along with the compact Catapult Mini RX and TX to create a custom snake designed for your unique application.

Specifications

Audio circuit type Passive mic splitter, transformer based
Frequency response 7Hz - 20kHz
Dynamic range 140dB
Total harmonic dirstortion 0.001%
Common mode rejection ratio >113dB
Maximum input +35dBu
Power Passive - no power required

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Radial Catapult RX4M
R800 8026 00

4-Channel Cat 5 Audio Snake

The Catapult TX4 and RX4 act like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.

Mix & Match

All of the Radial Catapult modules are compatible with each other, and each is sold individually, so you can select whichever combination best suits your needs. The Catapult RX4 and TX4 can be used together as a pair, creating a 4-channel audio snake. However, if you need transformer isolation to prevent hum and buzz when splitting audio signals, two additional models of Catapults are available. The TX4L and RX4L have line level isolation transformers for splitting playback tracks or outputs to amp racks, while the TX4M and RX4M can be employed when splitting mic signals on stage. Use any combination of these six models, along with the compact Catapult Mini RX and TX to create a custom snake designed for your unique application.

Specifications

Audio circuit type Passive mic splitter, transformer based
Frequency response 7Hz - 20kHz
Dynamic range 140dB
Total harmonic dirstortion 0.001%
Common mode rejection ratio >113dB
Maximum input +35dBu
Power Passive - no power required

(For full specifications see manufacturers product site under "links" tab)

 

Buy

The product has been added to your shopping cart Show shopping cartCheckout