Mounts

Most regular size J-Class enclosures such as the Radial JDI and J48 along with the smaller ProDI and SGI enclosures may be permanently affixed to a desk top, podium or inside a rack should the need arise using either the J-Clamp™ or P-Clamp™. Installation is easy, you merely remove the book-end outer shell and slide the inner frame into the Clamp and affix using the same hex screws. Handy flanges on each side are then used to bolt down the device for security.

The P-Clamp is used to secure the ProDI, SGI and other smaller-sized Radial products. You merely remove the four outer screws from the DI box, and slide the inner frame into the P-Clamp.

Most regular size J-Class enclosures such as the Radial JDI and J48 along with the smaller ProDI and SGI enclosures may be permanently affixed to a desk top, podium or inside a rack should the need arise using either the J-Clamp™ or Pro-Clamp™. Installation is easy, you merely remove the book-end outer shell and slide the inner frame into the Clamp and affix using the same hex screws. Handy flanges on each side are then used to bolt down the device for security.

The J-Clamp is used to secure the JDI, J48, Twin-Iso and most other full-sized Radial products. You merely remove the four outer screws from the DI box, and slide the inner frame into the J-Clamp.

Most Radial direct boxes, splitters, isolators and Reampers may be rack-mounted using either the J-Rak 4™ or the J-Rak 8™. These enable multiple units to be combined and safely stored for touring or used as part of a permanent installation. Mounting the DIs is easy. You simply remove the outer shell and slide the inner frame into one of the racks

Most Radial direct boxes, splitters, isolators and Reampers may be rack-mounted using either the J-Rak 4™ or the J-Rak 8™. These enable multiple units to be combined and safely stored for touring or used as part of a permanent installation. Mounting the DIs is easy. You simply remove the outer shell and slide the inner frame into one of the racks

Several Radial products such as the Firefly, Gold Digger and Cherry Picker may be rack-mounted for use in live touring or to fit in studio racks equipped with standard 19″ rail systems. Others, such as the SixPack and Cube, may also be mounted into a desk top to optimize ergonomics and studio efficiency.

The SA series rack adapter is a dual function angle bracket that may be used to mount one or two Radial Stand Alone (SA) series devices such as the Gold Digger, Cherry Picker and Phazer along with other Radial products like the Firefly into a standard 19″ rack frame. The 1 RU adapter comes complete with mechanical mounting screws, hex wrench, two angle brackets and a center cube attachment when fitting two devices side by side.

The Headload rack adaptor allows you to secure the Headload in a standard 19” equipment rack for permanent installations or pro touring acts. A series of mounting holes on the Headload work in conjunction with the rack ears, simply remove the feet and the handle from the Headload and attach the rack ears with the screws provided in the rack adaptor kit.