Your browser is not supported. For the best experience, a newer version or another browser is recommended.

Reamp

Reamp devices convert a balanced line-level signal to a high impedance instrument-level output, allowing you to take any previously recorded track and play it back through various guitar pedals or amplifiers to explore new tonal possibilities.

Number of articles 6
Sort
Radial X-Amp
R800 1028 00

Active Reamp

Following the critically acclaimed Radial JD7™ Injector, the X-Amp employs a unique class-A circuit design that has been optimized for use with guitars. Features include balanced line level input with LED peak indicator and level control, class-A circuit topology for optimal reach and frequency response, a transformer isolated output to eliminate hum and buzz caused by ground loops, a 180° polarity reverse switch to bring both amps into phase, and a dual ground lift switch for noise-free operation.

Specifications

Audio circuit type 100% discrete class-A
Frequency response 20Hz - 15kHz (±1.0dB)
Dynamic range 119dB
Total harmonic dirstortion 0.02% @ -15dBu
Intermodulation dirstortion 0.02% @ -20dBu
Input impedance 600 Ohms
Noise -110dB (OUT-1); -108dB (OUT-2)
Maximum input +22dBu
Power 15VDC/400mA adapter (included)

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Radial JCR
R800 1030 00

Original Reamp Circuit

The Radial Reamp JCR is the latest version of the original Reamp that was designed and patented by John Cuniberti. It features a 100% passive design with John's original custom wound 'Made in the USA' transformer and circuit. The latest Radial version features separate XLR and ¼" TRS input connectors, variable output level plus a three-position filter that lets you tame excessive highs, warm up the lows or simply bypass if you want to revert to the original circuit. An on-board mute function has also been added to allow you to shut off the signal going to the amps when making adjustments or moving mics around the studio.

Specifications

Audio circuit type Passive, transformer isolated
Frequency response 20Hz - 20kHz (+0dB/-1dB)
Dynamic range 140dB
Total harmonic dirstortion 0.001% @ 1kHz / 0dBu input
Intermodulation dirstortion 0.0025% @ 1kHz / -10dB input
Phase deviation 2° @ 100Hz; 0° @ 800Hz
Input impedance 1.8k Ohms
Output impedance 4.8k Ohms, balanced
Common mode rejection ratio -55dB @ 55Hz
Noise -115dBu
Maximum input +26dBu
Power Passive - no power required

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Radial ProRMP
R800 1125 00

Reamping for every studio

The Radial ProRMP is a 100% passive Reamper. This means it does not require any external powering. The magic behind the ProRMP's great tone is a custom wound transformer that at once converts the balanced line level source to a hi-z output for your amp while also acting as an electrical isolator to eliminate troublesome ground loops that can often cause buzz and hum in the sound. Plug and play easy to use, the ProRMP connects from the recorder to your amp and effects units and does all the impedance matching for you. Just adjust the level to suit!

Specifications

Audio circuit type Passive, transformer isolated
Frequency response 20Hz - 20kHz (+0dB/-1dB)
Dynamic range >137dB
Gain > -10dB
Total harmonic dirstortion 0.003%
Phase deviation 0.3° @ 100Hz; 5° @ 20Hz
Input impedance 600 Ohms
Output impedance 600 Ohms, balanced
Common mode rejection ratio 100dB @ 60Hz (unbalanced source)
Equivalent input noise > -98dBu (noise + gain)
Noise -111dBu
Maximum input > +26dBu
Power Passive - no power required

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Radial EXTC-SA
R800 1420 00

Guitar Effects Interface & Reamp Box

The EXTC allows you to get creative with your effects pedals, using them in your mix on any recorded track. Add a touch of distortion or chorus to a lead vocal, flange on a violin, or fuzz on piano - the possibilities are endless. The EXTC takes the line level balanced output of your recording interface and converts it so an instrument level high-Z output optimized for guitar effects pedals, so you can Reamp any track through your pedalboard with ease. Once you've run the signal through your pedals, connect the output back into the EXTC and it will boost it up to a balanced line level so you can connect directly to the input of your recording interface. The EXTC features Radial's class-A buffer for the best audio quality and transformer isolation to eliminate any buzz or hum - so you can focus your attention on using your pedals in new and exciting applications.

Specifications

Audio circuit type Solid state with transformer coupled effects loop
Frequency response:  
- Dry 20Hz - 20kHz (±1.5dB)
- Wet 20Hz - 10kHz (±3.5dB)
Total harmonic dirstortion:  
- Dry >0.005% @ 0dB output
- Wet >0.002% @ 0dB output
Intermodulation dirstortion:  
- Dry >0.003% @ 0dB input
- Wet <0.02% @ 0dB input
Input impedance 15k Ohms (line level)
Output impedance 200 Ohms (line level)
Noise:  
- Dry -93dB
- Wet -84dB
Maximum input:  
- Dry +26dBu
- Wet +20dBu

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Radial JD7
R800 7000 00

Studio Guitar Distribution and Splitting

The JD7 allows you to feed up to seven amplifiers simultaneously, with premium Jensen transformers on the outputs that ensure distortion-free signal transfer while blocking hum and buzz from ground loops. To help retain the natural tone of your instrument, Drag control load correction is also featured on the input so you won't lose the tone and feel of connecting your guitar directly to an amplifier.

Specifications

Audio circuit type 100% discrete class-A with transformer isolation
Number of channels 2 inputs / 7 outputs
Frequency response 20Hz - 20kHz (± 1dB)
Dynamic range 125dB
Total harmonic dirstortion 0.05% @ 1kHz (unbalanced); 0.1% @ 1kHz (balanced)
Intermodulation dirstortion 0.2% @ -20dBu
Input impedance Variable from 10k - 1M Ohms
Output impedance:  
¼" unbalanced 10k Ohms
XLR balanced 150 Ohms
Noise -115dBu
Maximum input +13dBu (unbalanced); +23dBu (balanced)
Power 15VDC/400mA power supply (included)

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Radial Reamp Kit
R800 1200 00

Reamp Kit

The Radial Reamp Kit includes everything you need to Reamp in a single case. Start by recording with the industry standard Radial J48 direct box. This active DI is ideal for Reamping as it will not load down the pickups and will deliver the true sound of the instrument without distortion or artifact.Then Reamp to your hearts content using the Radial X-Amp Reamper. This active Reamper has two buffered outputs for twice the fun! Run two amps at the same time, add pedals… try Reamping bass, drums and keys. Once you get started you will wonder how you ever recorded without it.

Buy

The product has been added to your shopping cart Show shopping cartCheckout