In order to give you better service we use cookies. By continuing to browse the site you are agreeing to our use of cookies.

Catapult Splitter

The Catapult is a passive audio snake that allows you to send four channels of analog audio over standard Cat 5 or Cat 6 Ethernet cable.

Filter & sort
Number of articles 9
Sort
Radial Catapult TX4
R800 8022 00

4-Channel Cat 5 Audio Snake

The Catapult TX4 and RX4 act like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.

Mix & Match

All of the Radial Catapult modules are compatible with each other, and each is sold individually, so you can select whichever combination best suits your needs. The Catapult RX4 and TX4 can be used together as a pair, creating a 4-channel audio snake. However, if you need transformer isolation to prevent hum and buzz when splitting audio signals, two additional models of Catapults are available. The TX4L and RX4L have line level isolation transformers for splitting playback tracks or outputs to amp racks, while the TX4M and RX4M can be employed when splitting mic signals on stage. Use any combination of these six models, along with the compact Catapult Mini RX and TX to create a custom snake designed for your unique application.

Specifications

Audio circuit type Passive splitter
Frequency response 7Hz - 20kHz
Dynamic range 140dB
Total harmonic dirstortion 0.0005% @ 1kHz
Common mode rejection ratio <103dB
Maximum input +35dBu
Power Passive - no power required

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Radial Catapult RX4
R800 8025 00

4-Channel Cat 5 Audio Snake

The Catapult TX4 and RX4 act like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.

Mix & Match

All of the Radial Catapult modules are compatible with each other, and each is sold individually, so you can select whichever combination best suits your needs. The Catapult RX4 and TX4 can be used together as a pair, creating a 4-channel audio snake. However, if you need transformer isolation to prevent hum and buzz when splitting audio signals, two additional models of Catapults are available. The TX4L and RX4L have line level isolation transformers for splitting playback tracks or outputs to amp racks, while the TX4M and RX4M can be employed when splitting mic signals on stage. Use any combination of these six models, along with the compact Catapult Mini RX and TX to create a custom snake designed for your unique application.

Specifications

Audio circuit type Passive splitter
Frequency response 7Hz - 20kHz
Dynamic range 140dB
Total harmonic dirstortion 0.0005% @ 1kHz
Common mode rejection ratio <103dB
Maximum input +35dBu
Power Passive - no power required

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Radial Catapult TX4M
R800 8023 00

4-Channel Cat 5 Audio Snake

The Catapult TX4 and RX4 act like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.

Mix & Match

All of the Radial Catapult modules are compatible with each other, and each is sold individually, so you can select whichever combination best suits your needs. The Catapult RX4 and TX4 can be used together as a pair, creating a 4-channel audio snake. However, if you need transformer isolation to prevent hum and buzz when splitting audio signals, two additional models of Catapults are available. The TX4L and RX4L have line level isolation transformers for splitting playback tracks or outputs to amp racks, while the TX4M and RX4M can be employed when splitting mic signals on stage. Use any combination of these six models, along with the compact Catapult Mini RX and TX to create a custom snake designed for your unique application.

Specifications

Audio circuit type Passive mic splitter, transformer based
Frequency response 7Hz - 20kHz
Dynamic range 140dB
Total harmonic dirstortion 0.001%
Common mode rejection ratio >113dB
Maximum input +35dBu
Power Passive - no power required

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Radial Catapult RX4M
R800 8026 00

4-Channel Cat 5 Audio Snake

The Catapult TX4 and RX4 act like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.

Mix & Match

All of the Radial Catapult modules are compatible with each other, and each is sold individually, so you can select whichever combination best suits your needs. The Catapult RX4 and TX4 can be used together as a pair, creating a 4-channel audio snake. However, if you need transformer isolation to prevent hum and buzz when splitting audio signals, two additional models of Catapults are available. The TX4L and RX4L have line level isolation transformers for splitting playback tracks or outputs to amp racks, while the TX4M and RX4M can be employed when splitting mic signals on stage. Use any combination of these six models, along with the compact Catapult Mini RX and TX to create a custom snake designed for your unique application.

Specifications

Audio circuit type Passive mic splitter, transformer based
Frequency response 7Hz - 20kHz
Dynamic range 140dB
Total harmonic dirstortion 0.001%
Common mode rejection ratio >113dB
Maximum input +35dBu
Power Passive - no power required

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Radial Catapult TX4L
R800 8024 00

4-Channel Cat 5 Audio Snake

The Catapult TX4 and RX4 act like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.

Mix & Match

All of the Radial Catapult modules are compatible with each other, and each is sold individually, so you can select whichever combination best suits your needs. The Catapult RX4 and TX4 can be used together as a pair, creating a 4-channel audio snake. However, if you need transformer isolation to prevent hum and buzz when splitting audio signals, two additional models of Catapults are available. The TX4L and RX4L have line level isolation transformers for splitting playback tracks or outputs to amp racks, while the TX4M and RX4M can be employed when splitting mic signals on stage. Use any combination of these six models, along with the compact Catapult Mini RX and TX to create a custom snake designed for your unique application.

Specifications

Audio circuit type Passive line splitter, transformer based
Frequency response 7Hz - 20kHz
Dynamic range 140dB
Total harmonic dirstortion 0.0007% @ 1kHz
Common mode rejection ratio >113dB
Maximum input +35dBu
Power Passive - no power required

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Radial Catapult RX4L
R800 8027 00

4-Channel Cat 5 Audio Snake

The Catapult TX4 and RX4 act like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.

Mix & Match

All of the Radial Catapult modules are compatible with each other, and each is sold individually, so you can select whichever combination best suits your needs. The Catapult RX4 and TX4 can be used together as a pair, creating a 4-channel audio snake. However, if you need transformer isolation to prevent hum and buzz when splitting audio signals, two additional models of Catapults are available. The TX4L and RX4L have line level isolation transformers for splitting playback tracks or outputs to amp racks, while the TX4M and RX4M can be employed when splitting mic signals on stage. Use any combination of these six models, along with the compact Catapult Mini RX and TX to create a custom snake designed for your unique application.

Specifications

Audio circuit type Passive line splitter, transformer based
Frequency response 7Hz - 20kHz
Dynamic range 140dB
Total harmonic dirstortion 0.0007% @ 1kHz
Common mode rejection ratio >113dB
Maximum input +35dBu
Power Passive - no power required

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Catapult Mini TX
CATAPULT MINI TX

4-Channel Cat 5 Audio Snake

The Catapult Mini System works like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.

Specifications

Audio circuit type Passive splitter
Frequency response 7Hz - 20kHz
Dynamic range 140dB
Total harmonic dirstortion 0.0005% @ 1kHz
Common mode rejection ratio >103dB
Maximum input +35dBu
Power Passive - no power required

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Catapult Mini RX
CATAPULT MINI RX

4-Channel Cat 5 Audio Snake

The Catapult Mini System works like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.

Specifications

Audio circuit type Passive splitter
Frequency response 7Hz - 20kHz
Dynamic range 140dB
Total harmonic dirstortion 0.0005% @ 1kHz
Common mode rejection ratio >103dB
Maximum input +35dBu
Power Passive - no power required

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Catapult Mini TRS
R800 8032 00

4-Channel Cat 5 Audio Snake

The Catapult Mini System works like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.

Specifications

Audio circuit type Passive splitter
Frequency response 7Hz - 20kHz
Dynamic range 140dB
Total harmonic dirstortion 0.0005% @ 1kHz
Common mode rejection ratio >103dB
Maximum input +35dBu
Power Passive - no power required

(For full specifications see manufacturers product site under "links" tab)

 

Buy

The product has been added to your shopping cart Show shopping cartCheckout