Your browser is not supported. For the best experience, a newer version or another browser is recommended.
In order to give you better service we use cookies. By continuing to browse the site you are agreeing to our use of cookies.

Guitar Amp

Guitar Amp Switchers

Amp switchers will allow you select between multiple amplifiers on stage, or select between multiple amp heads connected to a single speaker cabinet.

Number of articles 4
Sort
Radial JX-42
R800 6505 00

4x2 Guitar and Amp Switcher

The JX-42 is a surprisingly powerful guitar and amp control center, small enough to fit on top of your amp, but able to switch between up to four guitars and two amplifiers without noise. Each input is equipped with a trim control to level-match input signals, or a Drag control load correction circuit to optimize the impedance presented to magnetic pickups for a more natural tone. Optional JR-5 and JR-2 footswitches can be connected for instant switching available right at your feet, allowing the JX-42 to be rack mounted off-stage when used with wireless systems.

Specifications

Audio circuit type Class A BiFET buffering amplifier
Frequency response 20Hz - 20kHz
Dynamic range 112dB
Gain -1.5dBu
Total harmonic dirstortion 0.02%
Intermodulation dirstortion >0.027%
Phase deviation 5° @ 50Hz
Input impedance Drag control - variable from 22k - 500k Ohms
Output impedance 1k Ohms
Equivalent input noise -103dBu
Cross Talk -97dB
Maximum input +11dBu
Power 15V Center Pin +, 70mA

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Radial JX44
R800 6500 00

Concert Touring Guitar & Amp Signal Manager

The JX44 is the most complete guitar and amp switching and routing system available for professional concert touring, providing you with the ability to connect and manage up to four guitars, six amplifiers, an effects chain and a remote pedalboard with seamless integration throughout. Optional JR-5 remote footswitches can be used to select the inputs and outputs individually or to program and recall scenes to activate multiple amplifiers with a single footswitch. A local effects loop can be used to connect rackmount signal processors, and an SGI line driver is built-in to feed distant pedalboards with ease when used with the SGI-44 remote guitar interface. An assignable direct box output is also featured, and the JX44 can be used to reamp balanced line-level signals, with front panel status indicators to provide an easy systems check at a glance.

Specifications

Audio circuit type Active 100% discrete class-A with transformer isolation
Frequency response 20Hz - 20kHz (± 2.5dB)
Dynamic range 118dB
Total harmonic dirstortion 0.008% @ 1kHz
Intermodulation dirstortion 0.02% @ -20dBu
Input impedance Variable from 10k - 1M Ohms
Output impedance:  
¼" unbalanced 3k Ohms
XLR balanced 150 Ohms
Noise -106dBu
Maximum input +12dBu
Power 15V 1A adapter (included)

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Radial JX62
R800 6510 00

Concert Touring Guitar and Amplifier Switcher

The JX62 can help tame even the most complex guitar rigs, routing multiple inputs and outputs while also providing a stage tech with a headphone output and PFL switches to silently tune instruments and monitor any input without disrupting the performance. All six instrument inputs have adjustable trim controls to balance their relative levels, while channels 5 and 6 also feature direct outputs to feed the PA system, eliminating the need for external direct boxes. Dual amplifier outputs can be selected locally or with a remote JR-2 footswitch, with transformer isolation and ground lift switches to ensure noise free operation.

Specifications

Audio circuit type Class-A buffers with optical switching
Transformers Eclipse ET-DB2 & Jensen JT-11-YMPC
Number of channels 6 guitars, 2 amps
Frequency response 20Hz - 20kHz (± 1dB)
Dynamic range 120dB
Clip level +22dBu
Total harmonic dirstortion 0.007%
Intermodulation dirstortion 0.027%
Phase deviation <10° @ 50Hz
Input impedance Variable from 22k - 1M Ohms
Output impedance 680 Ohms
Equivalent input noise -94.7dBu
Noise -89.7dBu
Maximum input +18dBu
Power External supply 500mA with XLR-4 connector

(For full specifications see manufacturers product site under "links" tab)

 

Buy
Radial JD7
R800 7000 00

Studio Guitar Distribution and Splitting

The JD7 allows you to feed up to seven amplifiers simultaneously, with premium Jensen transformers on the outputs that ensure distortion-free signal transfer while blocking hum and buzz from ground loops. To help retain the natural tone of your instrument, Drag control load correction is also featured on the input so you won't lose the tone and feel of connecting your guitar directly to an amplifier.

Specifications

Audio circuit type 100% discrete class-A with transformer isolation
Number of channels 2 inputs / 7 outputs
Frequency response 20Hz - 20kHz (± 1dB)
Dynamic range 125dB
Total harmonic dirstortion 0.05% @ 1kHz (unbalanced); 0.1% @ 1kHz (balanced)
Intermodulation dirstortion 0.2% @ -20dBu
Input impedance Variable from 10k - 1M Ohms
Output impedance:  
¼" unbalanced 10k Ohms
XLR balanced 150 Ohms
Noise -115dBu
Maximum input +13dBu (unbalanced); +23dBu (balanced)
Power 15VDC/400mA power supply (included)

(For full specifications see manufacturers product site under "links" tab)

 

Buy

The product has been added to your shopping cart Show shopping cartCheckout