Smaart v8 is the industry leading, dual platform (Mac & Windows OS), FFT-Based, audio analysis software. Capable of performing unlimited simultaneous Spectrum, Transfer Function, Impulse Response, and SPL measurements – Smaart v8 is the most fully featured software-based audio analysis program offered by Rational Acoustics.
As a software tool, Smaart v8 is purpose built to scale up to fit the requirements of even the most complex systems and environments. The only practical limitation of Smaart is your own – be it expanding your hardware universe or improving your knowledge through practice and training.

RTA

• Fractional-Octave banding up to 1/48th octave resolution
• Multi-Channel input allows for simultaneous display of multiple individual RTAs – as well as “live averages” of multiple inputs.
• Fractional Octave or Line view of RTA data
• Ability to view raw and banded data simultaneously
• View Peak Holds, Target Curve (including cinema X-curves), and THD
• Accurately display SPL levels per 1 and 1/3 octave bands with calibrated inputs
• FIFO and integrating averaging (2, 4, 8, 16 FIFO, 1-10 Sec, Inf, Fast, Slow)

Spectrograph

• Spectrum-over-time with amplitude (level) represented by color
• Adjustable dynamic range
• Scrollable 1000+ line history
• Adjustable slice height
• Full Color or Grey Scale display

Transfer Function

• Magnitude & Coherence, Phase, and Live Impulse Response (Live IR) graphs
• Unlimited simultaneous TF measurement and Live averaging of TF engines
• Multi-Time-Window (MTW) & MTW+ proprietary data acquisition
• Power of 2 FFT data acquisition from 128-32k
• Up to 1/48th octave smoothing resolution for magnitude and phase graphs
• Delay Finder with Advanced Frequency Locater
• Automatic Delay Tracking
• FIFO and integrating averaging (2, 4, 8, 16 FIFO, 1-10 Sec, Inf, Fast, Slow)
• Support for Meyer Sounds M-Noise procedure

Impulse Response

• Linear (Lin), Logarithmic (Log), Energy Time Curve (ETC), Spectrogram, Frequency, & Histogram graphs
• Unlimited simultaneous IR Measurement
• Single and Dual channel IR Measurement capability
• Power of 2 FFT selection from 128 (2ms) to 512k (10922 ms)
• Schroeder Reverse Integration Curve for RT60 and EDT Calculation
• Speech Intelligibility Criterion including CIS, STI, and STIPA
• Calculate both Noiseless or Noise Present STI
• Automatic calculation of octave and 1/3 octave filter band passes
• User-definable frequency bandpass
• Support for synchronizing the FFT selection to the signal generator using pseudorandom noise and pink sweep
• All-Bands detail table view for all automatically generated acoustical criterion

Sound Pressure Level (SPL) Monitoring

• Comprehensive SPL monitoring and logging of any number of calibrated inputs simultaneously
• SPL A, C, & unweighted Fast and Slow, Peak A, C, unweighted or Peak Octave banded frequency center 
• Leq A, C, unweighted or Octave banded frequency center with user definable time-period from 1 second to 24 hours
• C-A bass ratio calculation
• OSHA and NIOSH exposure calculation
• L10, L50, L90 calculation
• 10 EaZy integration for Class 1 or 2 compliant SPL Measurement with Integrated Maximum Average Meter (MAM) display
• User-definable SPL grid window for viewing multiple SPL metrics simultaneously
• SPL History Window for navigating SPL Log files
• User definable SPL Alarms and ‘traffic light’ color display (green, yellow, red level definitions per SPL metric)
• Remote viewing via web-browser (over LAN or Internet)
• PDF report generation

Dual-Mono Signal Generator

• Random Pink Noise
• Pseudorandom Pink Noise
  • User adjustable time-constant from 128 to 1024k
  • Broadband or user-definable band-limiting
  • Speech Weighted noise spectrum
  • Drop IR Data window option for synch-IR measurement
• Pink Sweep (swept-sine tone)
  • User adjustable cycle period from 32k to 1024k
  • Triggerable by IR measurement
• Sine wave or dual-sine wave with user adjustable frequency/frequencies
• File Playback via .wav or .AIFF file formats (left side only for stereo files)
• Optionally capture of data stops the signal generator

Data Acquisition

• Unlimited simultaneous input channels and devices
• ASIO, Wav/WDM, and Core Audio driver support
• Input calibration for SPL
• Integrated Gain & Phantom Power control with gain tracking for the Roland OctaCapture
• 10 EaZy Hardware integration for pre-calibrated SPL measurement

Opdatering af Smaart fra v7 til v8.
Venligst oplys license nummer på v7 ved ordregivelse.
For opdatering fra andre versioner af Smaart til v8, venligst kontakt os.

While Smaart can access multichannel devices, it is designed to control and display only two standard Spectrum Engines, and one TF engine at a time. Smaart Di v2 is inherently Real Time mode only.

RTA

• Fractional-Octave banding up to 1/48th octave resolution
• Fractional octave or Line view of RTA data
• Ability to view raw and banded data simultaneously
• View Peak Holds, Target Curve (including cinema X-curves), and THD
• Accurately display SPL levels per 1 and 1/3 octave bands with calibrated inputs
• FIFO and integrating averaging (2, 4, 8, 16 FIFO, 1-10 Sec, Inf, Fast, Slow)
• Spectrum inputs 1 & 2 are automatically assigned to the Measurement and Reference channels of the default TF Engine
• Average multiple captured Spectrum data files (.srf) as dB or power.

Spectrograph

• Spectrum-over-time with amplitude (level) represented by color
• Adjustable dynamic range
• Scrollable 1000+ line history
• Adjustable slice height
• Full Color or Grey Scale display

Transfer Function

• Magnitude & Coherence, Phase, and Live Impulse Response (Live IR) graphs
• Create and switch between multiple “TF Pairs”
• Multi-Time-Window (MTW) & MTW+ proprietary data acquisition
• Power of 2 FFT data acquisition from 128-32k
• Up to 1/48th octave smoothing resolution for magnitude and phase graphs
• Delay Finder and Automatic Delay Tracking
• FIFO and integrating averaging (2, 4, 8, 16 FIFO, 1-10 Sec, Inf, Fast, Slow)
• Average multiple captured TF data files (.trf) as dB, dB Coherence weighted, or Power.

Sound Pressure Level (SPL) Measurement

• Monitor & Log 2 inputs for SPL at a time
• SPL Meters can be broke out in to their own floating window (effectively a 1x2 SPL grid)
• User selectable SPL A, C, and None (unweighted) Fast & Slow or Leq A, C, and None (1 min – 24 hours)
• SPL Logging of the displayed metric only

Dual-Mono Signal Generator

• Random Pink Noise
• Pseudorandom Pink Noise
  • User adjustable time-constant from 128 to 1024k
  • Broadband or user-definable band-limiting
  • Speech Weighted noise spectrum
• Sine wave or dual-sine wave with user adjustable frequency/frequencies
• File Playback via .wav or .AIFF file formats (left side only for stereo files)
• Optionally capture of data stops the signal generator

Data Acquisition

• Access any 2 connected inputs at a time
• ASIO, Wav/WDM, and Core Audio driver support
•  Input calibration for SPL
• Integrated Gain & Phantom Power control with gain tracking for the Roland OctaCapture
• Does not support internal “reference to generator” or Multi-Device Transfer Function measurement

Smaart SPL is a dedicated Sound Pressure Level metering, logging, and reporting application. SPL does not perform Spectrum, Transfer Function, or Impulse Response measurements.

Simple Interface with SPL History Plots

• Quick access to configuration functions and logging actions from a single, intuitive control bar
• SPL History timeline shows data collected over entire logged or live-logging event
• At-a-glance display of all calibrated inputs
• Expandable meter grid for unlimited user-defined SPL readouts

Customizable Metering

• Smaart SPL calculates 15 SPL metrics by default, additional customizable metrics may be configured using “Advanced Meter Config”
• Fully user configurable SPL Meter Grid window
• View multiple metrics from one or many microphones in real time
• Green, Yellow, and Red “traffic light” threshold controls for each metric independently

Web Browser Interface

• Remotely view Smaart SPL’s actively logging inputs via a networked (LAN or Internet) desktop or mobile device
• API supports multiple client connections
• Password protection option for access control

Alarms & Event Notes

• Configure alarms for any or all calibrated inputs
• Alarm Events are flagged in the SPL timeline and noted in the timestamped logfile
• Triggered Alarms cause the input in violation to flash for a user-definable duration
• “Add Note” events as needed to any actively logging input

Logfile Data

• Smaart SPL logs all default and user-configured SPL metrics
• Logfile contains a header for all Max values, as well as any overloads, alarm instances, and user-added notes.
• Click here for a sample log file.

SPL Summary Report

• Comprehensive and easy to interpret reporting for delivery of SPL data to production teams, venue management, archival purposes, or any other interested party.
• Optional automatic email generation to your default mail client
• Click here for a sample SPL summary.