In order to give you better service we use cookies. By continuing to browse the site you are agreeing to our use of cookies.

Augemented arrays

The A-Series establishes a new sound reinforcement concept that extends flexibility beyond its usual limits: the augmented array.
A system that is as flexible as a point source cluster, as controllable as a line array and introduces advanced features that alter the reality of perceived solutions to challenging application realities. Variable splay angles allow arrays of up to four A-Series loudspeakers to adapt precisely to venue shapes in fine increments. Broad distribution is achieved either horizontally or vertically with a minimal number of loudspeakers. Acoustic optimization in the form of the new amplifier function Midrange Directivity Control (MDC) is also offered as a clever alternative, alongside ArrayProcessing. All this from a d&b system that scales from a single loudspeaker to a full sound reinforcement solution, serving applications where a broad coverage area, exceptional sound and scalability demands meet.

Filter & sort
Number of articles 2
Sort
AL60 Loudspeaker
Z0730.002

AL60 Loudspeaker

The AL60 is an augmented array loudspeaker for medium scale sound reinforcement. When the AL Flyingframe is used, up to four cabinet modules can be flown in vertical columns producing a 60° constant directivity dispersion pattern in the horizontal plane. The AL60 can also be applied as horizontal array of maximum four loudspeakers using the AL Flying adapter.  The AL60 loudspeaker module is a passive 2-Way design housing two x 10" neodymium LF drivers and one 1.4" exit HF compression driver with a 3" diaphragm mounted to a dedicated wave shaping device and a passive crossover network. The wave segments of each cabinet couple without gaps and sum up coherently. Splay angles between adjacent cabinets can be set in a range from 20° to 40° in 5° increments resulting in a total coverage of 50° up to 70° for two cabinets, with a maximum total coverage of 150° per array. All components are arranged symmetrically around the center axis of the cabinet to produce a perfect symmetrical dispersion pattern. Broadband horizontal dispersion control is maintained down to approximately 550 Hz. The cabinet is constructed from marine plywood with an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent fabric.

Technical Specifications

Frequency response (-5 dB standard): 60 Hz - 18 kHz
Frequency response (-5 dB CUT mode): 95 Hz - 18 kHz
Max. sound pressure:  
with D20/30D 138dB
with D80 139dB
Cabinets pr amplifier channel: 2
Nominal impedance: 8 Ω
Power handling capacity (RMS/peak 10 ms): 400/1800 W
Nominal dispersion angle (h x v): 60° x 30°
Splay angle settings 20° - 40° (5° increment)
Components 2 x 10" LF drivers
  1 x 1.4" exit compression driver with 3" coil
passive crossover network
Dimensions (H x W x D): 322 x 700 x 356 mm
Weight: 23 kg

 

 

 

 

 

 

 

 

 

 

(For full specifications see manufacturers product site under "links")

AL90 Loudspeaker
Z0731.002

AL90 Loudspeaker

The AL90 is an augmented array loudspeaker for medium scale sound reinforcement. When the AL Flyingframe is used, up to four cabinet modules can be flown in vertical columns producing a 90° constant directivity dispersion pattern in the horizontal plane. The AL90 can also be applied as horizontal array of maximum four loudspeakers using the AL Flying adapter.  The AL90 loudspeaker module is a passive 2-Way design housing two x 10" neodymium LF drivers and one 1.4" exit HF compression driver with a 3" diaphragm mounted to a dedicated wave shaping device and a passive crossover network. The wave segments of each cabinet couple without gaps and sum up coherently. Splay angles between adjacent cabinets can be set in a range from 20° to 40° in 5° increments resulting in a total coverage of 50° up to 70° for two cabinets, with a maximum total coverage of 150° per array. All components are arranged symmetrically around the center axis of the cabinet to produce a perfect symmetrical dispersion pattern. Broadband horizontal dispersion control is maintained down to approximately 370 Hz. The cabinet is constructed from marine plywood with an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent fabric.

Technical Specifications

Frequency response (-5 dB standard): 60 Hz - 18 kHz
Frequency response (-5 dB CUT mode): 95 Hz - 18 kHz
Max. sound pressure:  
with D20/30D 138dB
with D80 139dB
Cabinets pr amplifier channel: 2
Nominal impedance: 8 Ω
Power handling capacity (RMS/peak 10 ms): 400/1800 W
Nominal dispersion angle (h x v): 90° x 30°
Splay angle settings 20° - 40° (5° increment)
Components 2 x 10" LF drivers
  1 x 1.4" exit compression driver with 3" coil
passive crossover network
Dimensions (H x W x D): 322 x 700 x 356 mm
Weight: 23 kg

 

 

 

 

 

 

 

 

 

 

(For full specifications see manufacturers product site under "links")

The product has been added to your shopping cart Show shopping cartCheckout