Line arrays

The d&b Line Arrays offer consistent, high performance solutions for any size of application, from the smallest theatres and concert venues to the largest stadiums and outdoor festival environments.
From the compact and flexible T-Series, Y-Series and V-Series, including their installation variants, to the large scale J-Series, the d&b line arrays share the same compelling attributes: sonic performance, carefully designed handling, and all the benefits of the d&b suite of applied software technologies. The SL-Series covers every eventuality, and delivers extraordinary dynamic range, with impressive power capability and headroom exclusively to where it is targeted. All systems are engineered for the trademark d&b qualities: low weight, constant directivity control down to low frequencies, cardioid subwoofer technology and integrated flying equipment. Hand in hand with the sophisticated loudspeaker management capabilities of the d&b Amplifiers, system design and optimization power of the d&b enabling technologies, the d&b Line Array range delivers all the tools needed to achieve Democracy for Listeners.

10AL Loudspeaker

Z1622.000

10AL Loudspeaker

The biaxial 10AL/10AL-D are high performance 2-way line array modules. They employ a single 10” driver in a bass-reflex enclosure and constant directivity HF line sources with either 75° or 105° horizontal coverage respectively using dual 1” exit drivers. They are lightweight passive designs using neodymium drivers and large horns for accurate pattern control. With their frequency response from 60 Hz to 18 kHz both versions can be used as full range systems and can also be supplemented by subwoofers from either the xS or xA-Series. The18A or 27A subwoofers can also be integrated into the array. The enclosures are constructed from marine plywood with an impact resistant black paint finish and are Ball Impact Resistant according to DIN 18032-3 for schools and sports halls. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. The side panels have an integrated rigging system and the rear panel incorporates two NL4 connectors as well as a two pole screw terminal block. The loudspeaker cabinets and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours, whilst the Weather Resistant (WR) option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.

Technical Specifications

Frequency response (-5 dB standard):	60 Hz - 18 kHz
Frequency response (-5 dB CUT mode):	110 Hz - 18 kHz
Max. sound pressure:
with D6/10D	130dB
with D20/30D	133dB
with D80	133dB
Cabinets pr amplifier channel:	3
Configuration:	Installation specific 2-way line array loudspeaker
Nominal impedance:	12 Ω
Power handling capacity (RMS/peak 10 ms):	200/1200 W
Nominal dispersion angle (h x v):	75°
Components	10" driver with neodymium magnet
	2 x 1" exit compression drivers with CD horn passive crossover network
Dimensions (H x W x D):	283 x 580 x 350 mm
Weight:	14 kg

_{(For full specifications see manufacturers product site}_{under "links")}

Call for price

10AL-D Loudspeaker

Z1623.000

10AL-D Loudspeaker

Technical Specifications

Frequency response (-5 dB standard):	60 Hz - 18 kHz
Frequency response (-5 dB CUT mode):	110 Hz - 18 kHz
Max. sound pressure:
with D6/10D	129dB
with D20/30D	132dB
with D80	132dB
Cabinets pr amplifier channel:	3
Configuration:	Installation specific 2-way line array loudspeaker
Nominal impedance:	12 Ω
Power handling capacity (RMS/peak 10 ms):	200/1200 W
Nominal dispersion angle (h x v):	105°
Components	10" driver with neodymium magnet
	2 x 1" exit compression drivers with CD horn passive crossover network
Dimensions (H x W x D):	283 x 580 x 350 mm
Weight:	14 kg

_{(For full specifications see manufacturers product site}_{under "links")}

Call for price

KSL8 Loudspeaker

Z0780.000

KSL8 Loudspeaker

The KSL8 line array module produces an 80° constant directivity dispersion pattern in the horizontal plane over the entire operating bandwidth. The KSL8 houses two 10" neodymium forward facing LF drivers and two side firing 8" neodymium LF drivers. A coaxial mid-high section contains an MF horn with an 8" driver and two 1.4" exit, 3" voice coil HF compression drivers mounted to a dedicated wave shaping device. SL-Series flying hardware comes with a patended workflow with integrated tension and compression rigging modes, allowing splay angles between cabinets from 0° to 10° in 1° increments. The loudspeakers are driven actively by two channels of an appropriate d&b amplifier. One channel powers the 10” LF drivers, the second channel powers all other components, which are passively crossed-over. This component geometry allows for a smooth crossover design with well-defined overlaps between adjacent bands providing consistent, even and very accurate horizontal dispersion. Due to the arrangement of the front and side firing LF drivers, seamless directivity control is maintained from the lowest frequencies the loudspeaker produces to above 18 kHz. Further expanding flexibility and catering for applications where smaller arrays are used and ArrayProcessing is not required, the KSL8 includes the option to link two cabinets in Line or Arc mode. The cabinets are constructed from marine plywood and have an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front and side panels incorporate rigid metal grills backed by an acoustically transparent and water repellent fabric. Each side panel incorporates a recessed handle, with additional handles provided at the rear.

Technical Specifications

Frequency response (-5 dB standard):	54 Hz - 18 kHz
Frequency response (-5 dB CUT mode):	75 Hz - 18 kHz
Max. sound pressure (1m, free field) with D80	145dB
Cabinets per D80 (ArrayProcessing)	2
Cabinets pr D80 (Line or Arc mode)	4
Nominal impedance front LF	8 Ω
Nominal impedance side LF/MF/HF	8 Ω
Power handling capacity front LF (RMS/peak 10 ms):	450/1800 W
Power handling capacity side LF/MF/HF (RMS/peak 10 ms):	250/1000 W
Nominal dispersion angle (h x v):	80°
Splay angle settings	0 … 10° (1° increment)
Components	2 x 10" front LF driver
	2 x 8" side LF driver 1 x 8" MF driver 2 x 1.4" exit compression driver with 3" voice coil passive crossover network
Dimensions (H x W x D):	330 x 1000 x 597 mm
Weight:	58 kg

_{(For full specifications see manufacturers product site}_{under "links")}

Call for price

KSL12 Loudspeaker

Z0781.000

KSL8 Loudspeaker

The KSL12 line array module produces an 120° constant directivity dispersion pattern in the horizontal plane over the entire operating bandwidth. The KSL12 houses two 10" neodymium forward facing LF drivers and two side firing 8" neodymium LF drivers. A coaxial mid-high section contains an MF horn with an 8" driver and two 1.4" exit, 3" voice coil HF compression drivers mounted to a dedicated wave shaping device. SL-Series flying hardware comes with a patended workflow with integrated tension and compression rigging modes, allowing splay angles between cabinets from 0° to 10° in 1° increments. The loudspeakers are driven actively by two channels of an appropriate d&b amplifier. One channel powers the 10” LF drivers, the second channel powers all other components, which are passively crossed-over. This component geometry allows for a smooth crossover design with well-defined overlaps between adjacent bands providing consistent, even and very accurate horizontal dispersion. Due to the arrangement of the front and side firing LF drivers, seamless directivity control is maintained from the lowest frequencies the loudspeaker produces to above 18 kHz. Further expanding flexibility and catering for applications where smaller arrays are used and ArrayProcessing is not required, the KSL12 includes the option to link two cabinets in Line or Arc mode. The cabinets are constructed from marine plywood and have an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front and side panels incorporate rigid metal grills backed by an acoustically transparent and water repellent fabric. Each side panel incorporates a recessed handle, with additional handles provided at the rear.

Technical Specifications

Frequency response (-5 dB standard):	54 Hz - 18 kHz
Frequency response (-5 dB CUT mode):	75 Hz - 18 kHz
Max. sound pressure (1m, free field) with D80	144dB
Cabinets per D80 (ArrayProcessing)	2
Cabinets pr D80 (Line or Arc mode)	4
Nominal impedance front LF	8 Ω
Nominal impedance side LF/MF/HF	8 Ω
Power handling capacity front LF (RMS/peak 10 ms):	450/1800 W
Power handling capacity side LF/MF/HF (RMS/peak 10 ms):	250/1000 W
Nominal dispersion angle (h x v):	120°
Splay angle settings	0 … 10° (1° increment)
Components	2 x 10" front LF driver
	2 x 8" side LF driver 1 x 8" MF driver 2 x 1.4" exit compression driver with 3" voice coil passive crossover network
Dimensions (H x W x D):	330 x 1000 x 597 mm
Weight:	58 kg

_{(For full specifications see manufacturers product site}_{under "links")}

Call for price

T10 Loudspeaker

Z0550.002

T10 Loudspeaker

The T10 is a passive 2-way loudspeaker housing two 6.5" drivers positioned in a dipolar arrangement and a 1.4" HF compression driver and a passive crossover network. The T10 can be used both as a line array and as a high directivity point source loudspeaker. The HF driver is fitted to a unique waveguide horn producing vertical line source directivity with a 90° horizontal pattern that is maintained down to approximately 600 Hz. An acoustic lens placed in front of the horn widens horizontal dispersion to 105°, rotation of the horn by 90° relative to this produces an accurate point source dispersion, transforming a vertically oriented T10 into a stand-alone full range loudspeaker with 90° horizontal and 35° vertical directivity pattern. The T10 cabinet is constructed from polyurethane integral hard foam, incorporates integrated line array rigging hardware and has an impact resistant finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam, and two EP5 or NL4 connectors wired in parallel are mounted on the rear panel.

Technical Specifications

Frequency response (-5 dB standard):	68 Hz - 18 kHz
Frequency response (-5 dB CUT mode):	112 Hz - 18 kHz
Max. sound pressure:
with D6/10D	129dB
with D20/30D	132dB
with D80	132dB
Cabinets pr amplifier channel:	4
Configuration:	2-way loudspeaker with rotatable horn for point and line source operation
Nominal impedance:	16 Ω
Power handling capacity (RMS/peak 10 ms):	200/800 W
Nominal dispersion angle (h x v):	90° x 35°
Components	10" driver with neodymium magnet
	2 x 1" exit compression drivers with CD horn passive crossover network
Dimensions (H x W x D):	283 x 580 x 350 mm
Weight:	14 kg

_{(For full specifications see manufacturers product site}_{under "links")}

Call for price

V8 Loudspeaker

Z0515.002

V8 Loudspeaker

The V8 is a 3-way passive design housing 2 x 10" LF drivers, one hornloaded 8" MF driver and two 1.4" exit HF compression drivers with 2.5" voicecoils mounted to a dedicated waveshaping device. The symmetrical dipolar arrangement of the neodymium LF drivers around the centrally mounted coaxial MF and HF components allows a smooth overlap of the adjacent frequency bands in the crossover design. This results in an exceptional 80° horizontal constant directivity dispersion control nominally being maintained down to 250 Hz. The mechanical and acoustical design enables flown vertical arrays of up to twenty four loudspeakers. It can be used in columns of purely V8 loudspeakers or combined with V12s and / or with V-SUBs. The V8 cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Each side panel incorporates a handle, while two additional recessed grips are provided at the rear bottom of the cabinet.

Technical Specifications

Frequency response (-5 dB standard):	67 Hz - 18 kHz
Frequency response (-5 dB CUT mode):	100 Hz - 18 kHz
Max. sound pressure:
with D20/30D	139dB
with D80	142dB
Cabinets pr amplifier channel:	2
Configuration:	High performance 3-way passive line array loudspeaker
Nominal impedance:	8 Ω
Power handling capacity (RMS/peak 10 ms):	500/2000 W
Nominal dispersion angle (h x v):	80°
Splay angle settings	0° - 14° (1° increment)
Components	10" driver / 1 x 8" driver
	2 x 1.4" exit compression driver passive crossover network
Dimensions (H x W x D):	310 x 700 x 460 mm
Weight:	34 kg

_{(For full specifications see manufacturers product site}_{under "links")}

Call for price

V12 Loudspeaker

Z0516.002

V12 Loudspeaker

The V12 is a 3-way passive design housing 2 x 10" LF drivers, one hornloaded 8" MF driver and two 1.4" exit HF compression drivers with 2.5" voicecoils mounted to a dedicated waveshaping device. The symmetrical dipolar arrangement of the neodymium LF drivers around the centrally mounted coaxial MF and HF components allows a smooth overlap of the adjacent frequency bands in the crossover design. This results in an exceptional 120° horizontal constant directivity dispersion control nominally being maintained down to 250 Hz. The mechanical and acoustical design enables flown vertical arrays of up to twenty four loudspeakers. It can be used in columns of purely V12 loudspeakers or combined with V8s and / or with V-SUBs. The cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Each side panel incorporates a handle, while two additional recessed grips are provided at the rear bottom of the cabinet.

Technical Specifications

Frequency response (-5 dB standard):	67 Hz - 18 kHz
Frequency response (-5 dB CUT mode):	100 Hz - 18 kHz
Max. sound pressure:
with D20/30D	139dB
with D80	142dB
Cabinets pr amplifier channel:	2
Configuration:	High performance 3-way passive line array loudspeaker
Nominal impedance:	8 Ω
Power handling capacity (RMS/peak 10 ms):	500/2000 W
Nominal dispersion angle (h x v):	120°
Splay angle settings	0° - 14° (1° increment)
Components	10" driver / 1 x 8" driver
	2 x 1.4" exit compression driver passive crossover network
Dimensions (H x W x D):	310 x 700 x 460 mm
Weight:	34 kg

_{(For full specifications see manufacturers product site}_{under "links")}

Call for price

Y8 Loudspeaker

Z0707.002

Y8 Loudspeaker

The compact Y8 line array loudspeaker is designed for use in vertical columns. The 2-way passive design features two 8” drivers in a dipole arrangement and a centrally mounted 1.4” compression driver with a wave transformer. Sophisticated horn geometry combined with the advanced bass-reflex port design delivers full bandwidth capabilities with an extended LF output. These high performance line array modules offer 80° horizontal directivity controlled down to 500 Hz. The mechanical and acoustical design enables vertical arrays of up to twenty four loudspeakers with vertical splay angles from 0° to 14° with a 1° resolution. It can be used in columns of purely Y8 loudspeakers or combined with Y12 and/or Y-SUB cabinets. The loudspeaker cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Each side panel incorporates a handle while two additional recessed grips are provided at the rear. Three point rigging hardware is integrated into the loudspeaker enclosure.

Technical Specifications

Frequency response (-5 dB standard):	54 Hz - 19 kHz
Frequency response (-5 dB CUT mode):	100 Hz - 19 kHz
Max. sound pressure:
with D6/10D	134dB
with D20/30D	137dB
with D80	139dB
Cabinets pr amplifier channel:	2
Configuration:	High performance 2-way passive line array loudspeaker
Nominal impedance:	8 Ω
Power handling capacity (RMS/peak 10 ms):	400/1600 W
Nominal dispersion angle (h x v):	80°
Splay angle settings	0° - 14° (1° increment)
Components	2 x 8" driver with neodymium magnet
	1 x 1.4" exit compression driver passive crossover network
Dimensions (H x W x D):	257 x 630 x 375 mm
Weight:	20 kg

_{(For full specifications see manufacturers product site}_{under "links")}

Call for price

Y12 Loudspeaker

Z0708.002

Y12 Loudspeaker

The compact Y12 line array loudspeaker is designed for use in vertical columns. The 2-way passive design features two 8” drivers in a dipole arrangement and a centrally mounted 1.4” compression driver with a wave transformer. Sophisticated horn geometry combined with the advanced bass-reflex port design delivers full bandwidth capabilities with an extended LF output. These high performance line array modules offer 120° horizontal directivity controlled down to 500 Hz. The mechanical and acoustical design enables vertical arrays of up to twenty four loudspeakers with vertical splay angles from 0° to 14° with a 1° resolution. It can be used in columns of purely Y12 loudspeakers or combined with Y8 and/or Y-SUB cabinets. The loudspeaker cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Each side panel incorporates a handle while two additional recessed grips are provided at the rear. Three point rigging hardware is integrated into the loudspeaker enclosure.

Technical Specifications

Frequency response (-5 dB standard):	54 Hz - 19 kHz
Frequency response (-5 dB CUT mode):	100 Hz - 19 kHz
Max. sound pressure:
with D6/10D	134dB
with D20/30D	137dB
with D80	139dB
Cabinets pr amplifier channel:	2
Configuration:	High performance 2-way passive line array loudspeaker
Nominal impedance:	8 Ω
Power handling capacity (RMS/peak 10 ms):	400/1600 W
Nominal dispersion angle (h x v):	120°
Splay angle settings	0° - 14° (1° increment)
Components	2 x 8" driver with neodymium magnet
	1 x 1.4" exit compression driver passive crossover network
Dimensions (H x W x D):	257 x 630 x 375 mm
Weight:	20 kg

_{(For full specifications see manufacturers product site}_{under "links")}

Call for price